No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of an mVRRP6 Group

Verifying the Configuration of an mVRRP6 Group

Procedure

  • Run the display vrrp6 binding admin-vrrp6 [ interface interface-type1 interface-number1 ] [ vrid virtual-router-id1 ] member-vrrp [ interface interface-type2 interface-number2 ] [ vrid virtual-router-id2 ] command to verify bindings between the mVRRP6 group and VRRP6 groups.
  • Run the display vrrp6 admin-vrrp6 command to verify the status of all mVRRP groups.
Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178423

Views: 87909

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next