No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Reliability

Overview of Reliability

Huawei switches provide various reliability technologies.

As networks rapidly develop and applications become more diversified, various value-added services such as Internet Protocol television (IPTV) and video conferencing have become increasingly more widespread. However, network disconnections may affect many services and cause losses. As a result, demands for network infrastructure reliability are rising.

In real-world applications, many network failures and service interruptions are caused by non-technical factors. An effective way to enhance system reliability is to improve fault tolerance capabilities of the system, speed up fault recovery, and reduce the impact of faults on services.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178423

Views: 88494

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next