No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Maximum Number of VRRP Groups

(Optional) Setting the Maximum Number of VRRP Groups

Context

By default, the device supports a maximum of 256 VRRP groups. When more than 256 VRRP groups need to be configured, run the set vrrp max-group-number max-group-number command.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set vrrp max-group-number max-group-number

    The maximum number of VRRP groups is set.

    By default, the device supports a maximum of 256 VRRP groups.

Follow-up Procedure

When more than 256 VRRP groups are configured, to reduce the frequency of sending VRRP Advertisement packets and the impact of VRRP Advertisement packets on network bandwidth and CPU performance, perform either of the following operations as prompted:

  • Increase the interval at which VRRP Advertisement packets are sent and the CPCAR of VRRP Advertisement packets.

    1. Run the vrrp vrid virtual-router-id timer advertise advertise-interval command to increase the interval at which VRRP Advertisement packets are sent for each VRRP group. For details, see (Optional) Configuring VRRP Time Parameters.
    2. Increase the CPCAR for VRRP Advertisement packets. Improper CPCAR settings will affect services on your network. If you need to adjust CPCAR settings, you are advised to contact Huawei technical personnel for help.
  • Configure mVRRP.

    For details on how to configure mVRRP, see Configuring an mVRRP Group.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178423

Views: 88572

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next