No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SmartMulti-Tenant Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the implementation principles and application scenarios of the SmartMulti-Tenant feature. Also, it explains how to configure and manage SmartMulti-Tenant.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying a Host LUN ID

Modifying a Host LUN ID

Host LUN ID is an ID allocated by the storage system to a LUN mapped to a host. This ID is visible on the host. You can manually change host LUN IDs based on site requirements.


  • A mapping view has been created.
  • LUN groups in the existing mapping view must contain LUNs.
  • Host services running on the LUN have been stopped. In addition, the LUN's physical disks and virtual disks generated by the multipathing have been uninstalled.


  • A host LUN ID is uniquely allocated to each LUN of a host.
  • LUNs of different hosts can have the same host LUN ID.


  1. Log in to DeviceManager.
  2. Go to the mapping view page.

    The operation path varies with user types:

    • System user: Click vStore, select the desired vStore, and click Details to go to the vStore view. Choose Provisioning > Mapping View.
    • vStore user: In the vStore view, choose Provisioning > Mapping View.

  3. Select a mapping view and click the LUN Group tab in the lower part of the left function pane.
  4. In the LUN group list, select the LUN whose host LUN ID you want to change and click Modify Host LUN ID.

    The Modify Host LUN ID dialog box is displayed.

  5. Select a new host LUN ID and click OK.
  6. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
  7. Click OK. The host LUN ID is successfully modified.
Updated: 2019-07-11

Document ID: EDOC1000181478

Views: 32351

Downloads: 196

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next