No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartMulti-Tenant Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the implementation principles and application scenarios of the SmartMulti-Tenant feature. Also, it explains how to configure and manage SmartMulti-Tenant.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying SmartQoS Information

Modifying SmartQoS Information

This operation enables you to modify the quality of service (QoS) policy of a LUN and view details about the QoS.

Prerequisites

At least one LUN has been created.

Context

Super administrators, administrators, and SAN resource administrators can modify SmartQoS information.

Procedure

  1. Log in to DeviceManager.
  2. Go to the LUN page.

    The operation path varies with user types:

    • System user: Click vStore, select the desired vStore, and click Details to go to the vStore view. Choose Provisioning > LUN.
    • vStore user: In the vStore view, choose Provisioning > LUN.

  3. Select the LUN whose properties you want to modify and click Properties.

    The Properties of LUN dialog box is displayed.

  4. Modify SmartQoS information.

    1. In the Properties of LUN dialog box, click the SmartQoS tab.

    2. In Priority Control and Traffic Control, select a proper priority and a traffic control policy respectively.
      NOTE:

      Click Properties and properly adjust the traffic control policy.

  5. Click OK.

    The security alert dialog box is displayed.

  6. Confirm the information in the dialog box. Select I have read and understand the consequences associated with performing this operation and click OK.

    The Execution Result dialog box is displayed.

  7. Click Close to finish modifying.
Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181478

Views: 29455

Downloads: 182

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next