Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding an Initiator to a Host
This operation enables you to add an initiator to a host.
Procedure
- Log in to DeviceManager.
- Go to the host page.
The operation path varies with user types:
- System user: Click
vStore, select the desired vStore, and click Details to go to the vStore view. Choose Provisioning > Host > Initiator.
- vStore user: In the vStore view, choose Provisioning > Host > Initiator.
- System user: Click
- Select initiators to be added to a host based on service requirements.
- Click Associate Host to add initiators to a host.
The Associate Host dialog box is displayed.
- Select a host and associate it with initiators. Then click OK.
The security alert dialog box is displayed.
- Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
- Click OK.
The Execution Result dialog box is displayed, indicating that the operation succeeded.
- Click Close.
vStore, select the desired vStore, and click Details to go to the vStore view. Choose Provisioning > Host > Initiator.
