No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SmartMulti-Tenant Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the implementation principles and application scenarios of the SmartMulti-Tenant feature. Also, it explains how to configure and manage SmartMulti-Tenant.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Owning vStore of an Initiator

Changing the Owning vStore of an Initiator

After a Fibre Channel or iSCSI connection is set up, the initiator is automatically mapped to the system view of the storage system. You can change the owning vStore of the initiator in the system view to allocate an initiator to the specified vStore.


Super administrators, administrators, and SAN resource administrators can change the owning vStore of an initiator.


  1. Choose Provisioning > Host > Initiator.
  2. Click Change vStore.

    The Change vStore dialog box is displayed.

  3. Select an initiator for change.

    1. In Initiator Type, select an initiator type.
    2. In the Initiator Type area, select one or multiple initiators based on your service need.
    3. Click to add the selected initiators to the Selected Initiators area.

  4. Select an owning vStore or system for the initiator.

    • Select vStore.

      Click and select the vStore to which the initiator belongs.

    • Select System to enable the system to own the initiator.

  5. Confirm the vStore change.

    1. Click OK.

      The security alert dialog box is displayed.

    2. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
    3. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    4. Click Close to complete the vStore change.

Updated: 2019-07-11

Document ID: EDOC1000181478

Views: 33401

Downloads: 198

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next