No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartMulti-Tenant Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the implementation principles and application scenarios of the SmartMulti-Tenant feature. Also, it explains how to configure and manage SmartMulti-Tenant.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Initiator

Creating an Initiator

If a Fibre Channel or iSCSI connection has not been established, the initiator cannot be automatically mapped to the system view of the storage system. You cannot add an initiator for the vStore by changing the owning vStore of the initiator in the system view. Instead, you can add an initiator for a vStore by creating an initiator in the vStore view.

Procedure

  1. Log in to DeviceManager.
  2. Go to the host page.

    The operation path varies with user types:

    • System user: Click vStore, select the desired vStore, and click Details to go to the vStore view. Choose Provisioning > Host > Initiator.
    • vStore user: In the vStore view, choose Provisioning > Host > Initiator.

  3. Click Create.

    The Create Initiator dialog box is displayed.

  4. In Type, select an initiator type.

    NOTE:

    The initiator types include:

    • iSCSI
    • FC
    • IB
    • vHBA

      The vHBA initiator applies to some storage device models only and only the alias of the initiator can be changed.

  5. Set the properties of the initiator based on the initiator type.

    If you select FC or IB, the related parameters are as shown in Table 5-8.

    Table 5-8 FC or IB initiator parameters

    Parameter

    Description

    Setting

    WWPN

    Unique identifier of an initiator.

    [Value range]

    A WWPN is a hexadecimal value that contains 16 characters comprised of uppercase letters A to F, lowercase letters a to f, or digits 0 to 9, but cannot all be 0, F, or f.

    [Example]

    2000000743abcdff

    Alias

    Alias of an initiator.

    [Value range]

    An alias:

    • Can be left blank or contain up to 31 characters.
    • Contains only letters, digits, periods (.), underscores (_), and hyphens (-).

    [Example]

    FC1_ALIAS

    Use third-party multipath software

    • Select Use third-party multipath software to use multipathing software not developed by the device provider. In the HyperMetro scenario, configure asymmetric logical unit access (ALUA) as described in the HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software.
    • If LUNs have been mapped to a host before you enable or disable Use third-party multipath software, restart the host after configuring this parameter.
    • If UltraPath is installed on a host, you do not need to enable this parameter.

    [Example]

    Use third-party multipath software

    Switchover Mode

    Path switchover mode. The storage system supports the following modes:

    • common ALUA: This mode is selected when the OS of the host that connects to the storage system is SUSE, Red Hat 6.X, Windows Server 2012 (Emulex HBA), Windows Server 2008 (Emulex HBA), or HP-UX 11i V3.
    • ALUA not used: This mode is selected when a host such as HP-UX 11i V2 does not support ALUA or the actual application scenario does not need ALUA.
    • Special mode: This mode is selected when the OS of the host that connects to the storage system is VMware, AIX, Red Hat 7.X, Windows Server 2012 (QLogic HBAs), or Windows Server 2008 (QLogic HBAs).
    NOTICE:

    In HyperMetro scenarios, set this parameter with the guidance of Huawei technical support engineers and follow the requirements in the HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software.

    NOTE:

    ALUA is a multi-target port access model. If multiple paths exist, the ALUA model provides a way of presenting active/passive LUNs to a host, and offers a port status switching interface to switch over the working controller. For example, when a host multipathing program supporting ALUA detects a port status change on a controller that becomes faulty, the program will automatically switch subsequent I/Os to another controller.

    [Example]

    common ALUA

    Special mode type

    This parameter must be configured if Switchover Mode is set to Special mode. The detailed requirements are as follows:

    • Mode 0:
      • The host and storage system must be connected using a Fibre Channel network.
      • The OS of the host that connects to the storage system is Red Hat 7.X, Windows Server 2012 (QLogic HBAs), or Windows Server 2008 (QLogic HBAs).
    • Mode 1:
      • The OS of the host that connects to the storage system is AIX or VMware.
      • In the HyperMetro scenario, HyperMetro is in load balancing mode.
    • Mode 2:
      • The OS of the host that connects to the storage system is AIX or VMware.
      • In the HyperMetro scenario, HyperMetro is in local preferred mode.
    • Mode 3:
      • The OS of the host that connects to the storage system is Linux or Solaris.
      • HyperMetro is in local preferred mode.
    NOTICE:

    In HyperMetro scenarios, set this parameter with the guidance of Huawei technical support engineers and follow the requirements in the HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software.

    [Example]

    Mode 0

    Path Type

    In the HyperMetro scenario, the storage system supports two path switchover modes: Optimal Path and Non-Optimal Path.

    • When HyperMetro is in load balancing mode, set Path Type for the initiators of both the local and remote storage systems to Optimal Path. Enable ALUA on both the host and storage systems. If the host uses the round-robin multipathing policy, it delivers I/Os to both storage systems in round-robin mode.
    • When HyperMetro is in local preferred mode, set Path Type for the initiator of the local storage system to Optimal Path, and that of the remote storage system to Non-Optimal Path. Enable ALUA on both the host and storage systems. The host delivers I/Os to the local storage system preferentially.

    In the non-HyperMetro scenario, retain the default value Optimal Path.

    [Example]

    Optimal Path

    If you select iSCSI, the related parameters are as shown in Table 5-9.

    Table 5-9 iSCSI initiator parameters

    Parameter

    Description

    Setting

    IQN

    iSCSI Qualified Name (IQN) of an iSCSI initiator.

    NOTE:

    The initiator IQN must be the same as the one on the application server. The IQN of each initiator must be unique. Do not configure the initiators of multiple application servers with the same IQN.

    [Value range]

    An IQN must contain 1 to 223 characters.

    [Example]

    iqn.1991-05.com.microsoft:host-name

    Alias

    Alias of an iSCSI initiator.

    [Value range]

    An alias:

    • Can be left blank or contain up to 31 characters.
    • Contains only letters, digits, periods (.), underscores (_), and hyphens (-).

    [Example]

    -

    Use third-party multipath software

    • Select Use third-party multipath software to use multipathing software not developed by the device provider. In the HyperMetro scenario, configure ALUA as described in the HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software.
    • If LUNs have been mapped to a host before you enable or disable Use third-party multipath software, restart the host after configuring this parameter.
    • If UltraPath is installed on a host, you do not need to enable this parameter.

    [Example]

    Use third-party multipath software

    Switchover Mode

    Path switchover mode. The system supports the following modes:

    • common ALUA: This mode is selected when the OS of the host that connects to the storage system is SUSE, Red Hat 6.X, Windows Server 2012 (Emulex HBA), Windows Server 2008 (Emulex HBA), or HP-UX 11i V3.
    • ALUA not used: This mode is selected when a host such as HP-UX 11i V2 does not support ALUA or the actual application scenario does not need ALUA.
    • Special mode: This mode is selected when the OS of the host that connects to the storage system is VMware, AIX, Red Hat 7.X, Windows Server 2012 (QLogic HBAs), or Windows Server 2008 (QLogic HBAs).
    NOTICE:

    In HyperMetro scenarios, set this parameter with the guidance of Huawei technical support engineers and follow the requirements in the HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software.

    NOTE:

    ALUA is a multi-target port access model. If multiple paths exist, the ALUA model provides a way of presenting active/passive LUNs to a host, and offers a port status switching interface to switch over the working controller. For example, when a host multipathing program supporting ALUA detects a port status change on a controller that becomes faulty, the program will automatically switch subsequent I/Os to another controller.

    [Example]

    common ALUA

    Special mode type

    This parameter must be configured if Switchover Mode is set to Special mode. The detailed requirements are as follows:

    • Mode 0:
      • The host and storage system must be connected using a Fibre Channel network.
      • The OS of the host that connects to the storage system is Red Hat 7.X, Windows Server 2012 (QLogic HBAs), or Windows Server 2008 (QLogic HBAs).
    • Mode 1:
      • The OS of the host that connects to the storage system is AIX or VMware.
      • In the HyperMetro scenario, HyperMetro is in load balancing mode.
    • Mode 2:
      • The OS of the host that connects to the storage system is AIX or VMware.
      • In the HyperMetro scenario, HyperMetro is in local preferred mode.
    • Mode 3:
      • The OS of the host that connects to the storage system is Linux or Solaris.
      • HyperMetro is in local preferred mode.
    NOTICE:

    In HyperMetro scenarios, set this parameter with the guidance of Huawei technical support engineers and follow the requirements in the HyperMetro Configuration Guide for Huawei SAN Storage Using OS Native Multipathing Software.

    [Example]

    Mode 0

    Path Type

    In the HyperMetro scenario, the storage system supports two path switchover modes: Optimal Path and Non-Optimal Path.

    • When HyperMetro is in load balancing mode, set Path Type for the initiators of both the local and remote storage systems to Optimal Path. Enable ALUA on both the host and storage systems. If the host uses the round-robin multipathing policy, it delivers I/Os to both storage systems in round-robin mode.
    • When HyperMetro is in local preferred mode, set Path Type for the initiator of the local storage system to Optimal Path, and that of the remote storage system to Non-Optimal Path. Enable ALUA on both the host and storage systems. The host delivers I/Os to the local storage system preferentially.

    In the non-HyperMetro scenario, retain the default value Optimal Path.

    [Example]

    Optimal Path

    Enable CHAP authentication

    CHAP authentication includes Discovery Authentication and Normal Authentication.

    • If Enable CHAP authentication is selected, you must set CHAP name and Password for the storage system. In addition, you must set CHAP name and Password on the application server for it to access the storage system.
    • If Enable CHAP authentication is not selected, you do not need to set CHAP name or Password for the storage system.

    [Example]

    -

    Normal Authentication

    Normal authentication is a process during which the target and initiator transmit data between each other after connections are set up. Authentication includes:

    • No authentication
    • Unidirectional authentication

      The target authenticates the initiator.

    • Bidirectional authentication

      The target and initiator authenticate each other.

    [Default Value]

    Unidirectional authentication

    Discovery Authentication

    Discovery authentication is a process during which the target and initiator set up connections. Authentication includes:

    • No authentication
    • Unidirectional authentication

      The target authenticates the initiator.

    • Bidirectional authentication

      The target and initiator authenticate each other.

    [Default Value]

    No authentication

    CHAP name

    User name for CHAP authentication.

    NOTE:
    • The name contains 4 to 223 characters.
    • The name only contains letters, digits or special characters. Special characters are:

      !"#$&%'()*+,-./:;<=>?@[\]^_`{|}~

    • The first character must be a letter or digit.

    [Example]

    admin

    Password

    Password for CHAP authentication.

    • The password contains 12 to 16 characters.
    • The password must contain three of the following four types of characters:
      • Uppercase letters
      • Lowercase letters
      • Digits
      • Special characters (including space)

        !"#$&%'()*+,-./:;<=>?@[\]^_`{|}~

    • The password must not be the same as the user name or the reverse of the user name.

    [Example]

    Admin@123456789

    Confirm Password

    Password for CHAP authentication.

    [Value range]

    The value of Confirm Password must be consistent with that of Password.

    [Example]

    -

  6. Click OK.

    The Success dialog box is displayed, indicating that the operation succeeded.

  7. Select the initiator that you want to add, select a host that you want to associate with the initiator, and click Associate Host.
  8. Click OK.

    The Execution Result dialog box is displayed, indicating that the operation succeeded.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181478

Views: 33748

Downloads: 201

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next