About This Document
Purpose
This document describes SmartDedupe and SmartCompression features for block services, including their working principles, application scenarios, and configuration processes.
The following table lists the product models supporting SmartDedupe and SmartCompression.
Product Series |
Product Model |
Product Version |
|---|---|---|
OceanStor 2000 V5 series |
OceanStor 2600 V5 |
V500R007C71 Kunpeng |
OceanStor 5000 V5 series |
OceanStor 5300 V5, 5500 V5, 5600 V5, and 5800 V5 |
V500R007C00 V500R007C10 V500R007C20 V500R007C30 V500R007C50 V500R007C60 V500R007C61 |
OceanStor 5300 V5, 5500 V5, and 5800 V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng V500R007C73 Kunpeng |
|
OceanStor 5600 V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng |
|
OceanStor 6000 V5 series |
OceanStor 6800 V5 |
V500R007C00 V500R007C10 V500R007C20 V500R007C30 V500R007C50 V500R007C60 V500R007C61 |
OceanStor 6800 V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng V500R007C73 Kunpeng |
|
OceanStor 18000 V5 series |
OceanStor 18500 V5 and 18800 V5 |
V500R007C00 V500R007C10 V500R007C20 V500R007C30 V500R007C50 V500R007C60 V500R007C61 |
OceanStor 18500 V5 and 18800 V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng |
|
OceanStor 5000F V5 series |
OceanStor 5300F V5, 5500F V5, 5600F V5, and 5800F V5 |
V500R007C00 V500R007C10 V500R007C20 V500R007C30 V500R007C50 V500R007C60 V500R007C61 |
OceanStor 5300F V5, 5500F V5, 5600F V5, and 5800F V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng |
|
OceanStor 6000F V5 series |
OceanStor 6800F V5 |
V500R007C00 V500R007C10 V500R007C20 V500R007C30 V500R007C50 V500R007C60 V500R007C61 |
OceanStor 6800F V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng |
|
OceanStor 18000F V5 series |
OceanStor 18500F V5 and 18800F V5 |
V500R007C00 V500R007C10 V500R007C20 V500R007C30 V500R007C50 V500R007C60 V500R007C61 |
OceanStor 18500F V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng V500R007C73 Kunpeng |
|
OceanStor 18800F V5 |
V500R007C60 Kunpeng V500R007C70 Kunpeng V500R007C71 Kunpeng |
|
OceanStor 5x10 V5 series |
OceanStor 5110 V5 |
V500R007C30 V500R007C60 V500R007C61 |
OceanStor 5x10F V5 series |
OceanStor 5110F V5 |
V500R007C30 V500R007C60 V500R007C61 |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 16 (2021-10-30)
This issue is the sixteenth official release. The updates are as follows:
Optimized the document description.
Issue 15 (2021-09-15)
This issue is the fifteenth official release. The updates are as follows:
Optimized the document description.
Issue 14 (2021-01-30)
This issue is the fourteenth official release. The updates are as follows:
Optimized the document description.
Issue 13 (2020-11-30)
This issue is the thirteenth official release. The updates are as follows:
Optimized the document description.
Issue 12 (2020-09-15)
This issue is the twelfth official release. The updates are as follows:
Optimized the document description.
Issue 11 (2020-07-15)
This issue is the eleventh official release. The updates are as follows:
Optimized the document description.
Issue 10 (2020-04-10)
This issue is the tenth official release. The updates are as follows:
Optimized the document description.
Issue 09 (2019-12-30)
This issue is the ninth official release. The updates are as follows:
Added the description of Kunpeng series product models.
Issue 08 (2019-06-30)
This issue is the eighth official release, which incorporates the following changes:
Added the description of 5210 V5 and 5210F V5.
Issue 07 (2019-05-15)
This issue is the seventh official release, which incorporates the following changes:
Added the description of 5110F V5.
Issue 06 (2019-03-30)
This issue is the sixth official release, which incorporates the following changes:
Added the description of 5110 V5.
Issue 05 (2018-12-06)
This issue is the fifth official release, which incorporates the following changes:
Optimized the document description.
Issue 04 (2018-07-30)
This issue is the fourth official release, which incorporates the following changes:
Optimized the document description.
Issue 03 (2018-05-09)
This issue is the third official release, which incorporates the following changes:
Optimized the document description.
Issue 02 (2018-01-30)
This issue is the second official release, which incorporates the following changes:
Optimized the document description.
Issue 01 (2017-11-30)
This issue is the first official release.