Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling SmartCompression
Running SmartCompression slightly affects data performance. If an application requires high data performance, disable SmartCompression.
Context
Disabling this function will not release the previously saved space.
Procedure
- Go to the LUN Properties dialog box.
- Non-vStore scenario
- On the right navigation bar, click
Provisioning.
- In the Block Storage Service area, click
LUN.
- In the left function pane, click the LUN tab.
- In the function pane, select a LUN with SmartDedupe and SmartCompression enabled.
- Click Properties.
The Properties of LUN dialog box is displayed.
- On the right navigation bar, click
- vStore scenario
- System user:
- Click
vStore. On the displayed page, click Details.
- In the left navigation tree, choose .
- Click the LUN tab.
- Select the LUN with SmartDedupe and SmartCompression enabled and click Properties.
The Properties of LUN dialog box is displayed.
- Click
- vStore user:
- Choose .
- Click the LUN tab.
- Select the LUN with SmartDedupe and SmartCompression enabled and click Properties.
The Properties of LUN dialog box is displayed.
- System user:
- Non-vStore scenario
- Disable SmartCompression.
- Click the More tab and select SmartDedupe&SmartCompression.
- Deselect Enable data compression.
- Verify that SmartCompression is disabled.
- Click OK.
The Execution Result dialog box is displayed.
- Click Close.
- Click OK.
Provisioning.
LUN.