Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring SmartDedupe and SmartCompression
About This Chapter
Assuming the licenses for SmartDedupe and SmartCompression are valid, configure and enable the SmartDedupe and SmartCompression functions of LUNs to allow the storage system to deduplicate and compress data that has been written to the LUNs.
To master GUI-based operations, you are advised to read this document and practice the operations using the DeviceManager Demo. As a simulation program of storage system management software, the DeviceManager Demo simulates configuration and management operations on a storage system.
If you have enabled neither SmartDedupe nor SmartCompression when you create a LUN, you cannot enable them any more after the LUN is created.