Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring and Managing SmartDedupe and SmartCompression Using CLI Commands
This section provides some CLI commands for configuring and managing SmartDedupe and SmartCompression (for block services).
- The CLI commands supported by different models may vary.
- For more CLI commands and their description, see the Command Reference specific to your product model and version.
Configuring SmartDedupe and SmartCompression Using CLI Commands
Table A-1 Commands for configuring SmartDedupe and SmartCompression
Operation |
Command |
Reference |
|---|---|---|
Creating a LUN and Setting the Enabling Status of SmartDedupe and SmartCompression |
create lun name=? pool_id=? allocation_policy=? capacity=? lun_type=thin compression_enabled=? compression_method=? dedup_enabled=? bytecomparison_enabled=? NOTE:
|
For details, see create lun in the Command Reference. |
Managing SmartDedupe and SmartCompression Using CLI Commands
Table A-2 Commands for managing SmartDedupe and SmartCompression
Operation |
Command |
Reference |
|---|---|---|
Modifying the SmartDedupe and SmartCompression Status of a LUN |
change lun lun_id=? compression_enabled=? compression_method=? dedup_enabled=? bytecomparison_enabled=? |
For details, see change lun in the Command Reference. |
Querying LUNs with SmartDedupe and SmartCompression |
show lun dedup_compress |
For details, see show lun dedup_compress in the Command Reference. |
Querying SmartDedupe and SmartCompression Information of a Specified LUN |
show lun dedup_compress lun_id=? show lun dedup_compress lun_name=? |