Viewing Real-Time Monitoring Data

Context

Before viewing monitoring data, ensure that Collection Switch is enabled. If Collection Switch is disabled, choose System > System Configuration > Registration and Configuration and enable it.

This document describes how to view real-time monitoring data of controllers. This process is similar for other objects. For further details on this, see the corresponding SystemReporter user guide.

Procedure

1. Go to the controller monitoring page.
   1. On the top navigation bar of the SystemReporter user interface, click Monitoring.
   2. In the left navigation tree, choose Controller for the corresponding device model.
   3. In the right pane, click Real Time.

      The real-time monitoring page is displayed.

2. Optional: Select an indicator template.

   You can click Details after the Indicator Template drop-down list to view the indicators included in the current object type in the indicator template.

   • If an indicator template is selected in a resource type, SystemReporter only displays the indicators that support the resource type in the indicator template.
   • If a resource type does not support any indicator in an indicator template, SystemReporter will not display that indicator template.

3. Set display rules.
   1. Click after Display Rules.

      The Customize Display Items dialog box is displayed.

   2. Select desired controllers in the Available area and click .
   3. Click OK.

4. In the right pane, see the views of the monitored items. For details about this, see 6 Performance Indicators.

Follow-up Procedure

In the right pane, you can also carry out the operations described in Table 3-6.