No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using an External Storage System to Perform Initial Synchronization for a Remote Replication Pair

Using an External Storage System to Perform Initial Synchronization for a Remote Replication Pair

You can perform initial synchronization for a remote replication pair using an external storage system.

This chapter is intended for Huawei technical engineers. If you want to use this method to perform initial synchronization, contact Huawei technical support.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 50963

Downloads: 375

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next