No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Remote Device

Removing a Remote Device

By performing this operation, you can remove unwanted remote storage devices.

Prerequisites

A remote device exists in the system and the remote device does not run the inter-array remote replication, LUN copy, or clone service.

Procedure

  1. Log in to DeviceManager.
  2. Choose Data Protection > Remote Device.
  3. Select the remote device you want to remove and click Remove on the menu bar. You can also right-click the remote device that you want remove, and choose Remove.

    The security alert dialog box is displayed.

    If authentication fails, modify authentication information.

  4. Confirm the removal of the remote device.

    1. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
    2. Click OK.

      The Success dialog box is displayed, indicating that the operation succeeded.

    3. Click OK.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 47873

Downloads: 358

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next