No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Synchronizing a Remote Replication Pair

Synchronizing a Remote Replication Pair

In the scenario where a remote replication pair has completed the initial synchronization and then a host writes data to the primary resource or splits the remote replication pair, there will be data inconsistency between the primary resource and the secondary resource. In this case, you can synchronize the remote replication pair to ensure data consistency.


  • The remote replication pair for which you want to perform data synchronization is not added to a consistency group.
  • The secondary resource protection status is read-only.
  • The Pair Running Status of the remote replication pair determines whether data synchronization can be performed for the remote replication pair, as shown in Table 4-14.
    Table 4-14 Status requirements for synchronizing a remote replication pair

    Running Status of a Remote Replication Pair

    Synchronizing a Synchronous Remote Replication Pair (Supported or Not)

    Synchronizing an Asynchronous Remote Replication Pair (Supported or Not)







    Interrupted (link down)



    Interrupted (link up)



    To be recovered










  1. Log in to DeviceManager.
  2. Go to the remote replication pair page.

    The operation path varies with user types:

    • System user: Click vStore, select the desired vStore, and click Details to go to the vStore view. Choose Data Protection > Remote Replication > Remote Replication Pair.
    • vStore user: In the vStore view, choose Data Protection > Remote Replication > Remote Replication Pair.

  3. Right-click the remote replication pair you want to synchronize and choose Synchronize.

    The security alert dialog box is displayed.

  4. Confirm the remote replication pair synchronization.

    1. Confirm the information in the dialog box. Select I have read and understand the consequences associated with performing this operation. Click OK.

      The Success dialog box is displayed, indicating that the operation succeeded.

    2. Click OK.

Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 51414

Downloads: 376

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next