No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the License File

Checking the License File

Remote replication is a value-added feature that requires a license file. Before configuring remote replication, ensure that its license file is valid.

Context

On the DeviceManager interface, the feature name is displayed as HyperReplication (Remote Replication).

Precautions

The capacity of the remote replication license for OceanStor 18000 series storage systems must be equal to or larger than the total capacity of LUNs equipped with this feature. However, if the total capacity of the LUNs in a storage pool equipped with this feature is larger than that of the storage pool, use the capacity of the storage pool to calculate the capacity required for the remote replication license. The following is a capacity calculation example.

Storage Pool Name

LUN Capacity (Total Capacity of Thin and Thick LUNs)

Capacity of the Storage Pool To Which LUNs Belong

License Capacity You Must Apply for the Storage Pool

Total License Capacity You Must Apply

StoragePool001

5 GB

10 GB

5 GB

≥ 25 GB

StoragePool002

10 GB

10 GB

10 GB

StoragePool003

20 GB

10 GB

10 GB

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > License Management.
  3. Check the activated license files.

    • For V500R007C10 and earlier versions, perform the following steps to check the activated license file:
      1. In the navigation tree on the left, choose Active License.
      2. In the middle information pane, verify the information about active license files.
    • For V500R007C20 and later versions, you can view all activated license files in the function pane at the lower part of the License Management page.

Follow-up Procedure

  • If no license for HyperReplication is available, apply for and import a license file by following instructions in the Installation Guide specific to your storage system.
  • If the storage system generates an alarm indicating that the license expired, obtain and import the license file again.
Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 48593

Downloads: 363

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next