No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Consistency Group

Deleting a Consistency Group

By performing this operation, you can delete an unwanted consistency group.

Prerequisites

Based on Running Status of the consistency group, determine whether the group can be deleted, as shown in Table 3-33.

Table 3-33 Status requirements for deleting a consistency group

Running Status of a Consistency Group

Deleting a Consistency Group (Supported or Not)

Normal

No

Split

Yes

Interrupted

Yes

To be recovered

No

Synchronizing

No

Invalid

Yes

Precautions

  • The essence of deleting a consistency group is to delete the consistency group configuration information stored on both local and remote storage devices. In this way, the consistency group can be deleted.
  • If a remote replication link fails, you must forcibly delete the consistency group from the local and remote devices respectively.
  • After a consistency group is deleted, you cannot centrally manage the remote replication pairs in the group.

Procedure

  1. Log in to DeviceManager.
  2. Choose Data Protection > Remote Replication > Remote Replication Consistency Group.
  3. Right-click the desired consistency group and choose Delete.

    The security alert dialog box is displayed.

  4. Confirm the operation of deleting the consistency group.

    1. Select Only delete the configuration information about the local device if the local device is disconnected from the remote device based on the situation.
      NOTE:
      • This option is applicable to scenarios where the physical link between the local storage system and remote storage system is disconnected. In such scenarios, this option is mandatory. Otherwise, the group cannot be deleted.
      • If you want to delete the configuration information of the consistency group from the remote storage device, you must perform this operation on the remote storage device.
      • If the physical link is normal, do not select this option.
    2. Carefully read the contents of the dialog box. Select I have read and understand the consequences associated with performing this operation. Click OK to confirm the information.

      The Success dialog box is displayed, indicating that the operation succeeded.

    3. Click OK.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 48056

Downloads: 359

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next