No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Set the Bandwidth for Remote Replication and LUN Copy Between Storage Arrays to Achieve the Optimal Performance?

How Can I Set the Bandwidth for Remote Replication and LUN Copy Between Storage Arrays to Achieve the Optimal Performance?

Question

How can I set the bandwidth for remote replication and LUN copy between storage arrays to achieve the optimal performance?

Answer

Bandwidth refers to the amount of data that is transferred on a channel in a certain period of time. Its common unit is bit per second (bps). Bandwidth of a computer network refers to the maximum data rate on the network, that is, the number of bits transferred per second. When setting the bandwidth, note the following:

  • The bandwidth should be set to meet the requirements of actual services. You can customize a proper bandwidth as required.
  • The bandwidth should be set to a value not larger than the current bandwidth of customers' networks.

If the workload in the system is heavy, the bandwidth for remote replication and LUN copy between storage arrays can be reduced to guarantee the proper running of ongoing services.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 47906

Downloads: 358

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next