No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Protection for the Secondary Resources of a Consistency Group

Enabling Protection for the Secondary Resources of a Consistency Group

By performing this operation, you can enable protection for secondary resources of all remote replication pairs in a consistency group. Data cannot be written into the secondary resources to ensure data security.


Based on Running Status of a consistency group and Secondary Resource Data Status of the remote replication pairs added to the consistency group, determine whether protection for the secondary resources can be enabled for the consistency group, as shown in Table 3-31.

Table 3-31 Status requirements for enabling protection for secondary resources of a consistency group

Running Status of a Consistency Group

Secondary Resource Data Status

Enabling Protection for Secondary Resources (Supported or Not)


Any status





Interrupted (link down)


Yes (Can be performed only on the secondary device of a consistency group.)

Interrupted (link up)

Any status


To be recovered

Any status



Any status



Any status



  1. Log in to DeviceManager.
  2. Choose Data Protection > Remote Replication > Remote Replication Consistency Group.
  3. Enable protection for secondary resources.

    1. Select the consistency group you want to enable protection for secondary resources.
    2. Choose More > Enable Protection for Secondary Resource.

      The Success dialog box is displayed.

    3. Click OK.

Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 54340

Downloads: 390

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next