No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Is the Secondary LUN Not Displayed When a Remote Replication Pair Is Created?

Why Is the Secondary LUN Not Displayed When a Remote Replication Pair Is Created?


Why is the secondary LUN not displayed when a remote replication pair is created?


When a remote replication pair is created, the system automatically filters secondary LUNs that can be used to create the remote replication pair. LUNs that have different capacities with the primary LUN (calculated in blocks) or LUNs that are mapped to the host are all filtered out. Locate and rectify the cause. If the secondary LUN is still not displayed when the remote replication pair is created, contact Huawei technical support.

Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 53772

Downloads: 386

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next