No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperReplication Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It describes the working principle and application scenarios of the HyperReplication feature (for block). Also, it explains how to configure and manage the feature.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Advanced Properties of a Remote Link

Modifying the Advanced Properties of a Remote Link

By performing this operation, you can modify the bandwidth and bandwidth usage of a link.

Prerequisites

  • The system has a normal remote link.
  • Only when the link connects to a remote device whose type is Replication, you can modify advanced properties of the link.

Context

The remote link can be a Fibre Channel link or an iSCSI link.

Procedure

  1. Log in to DeviceManager.
  2. Choose Data Protection > Remote Device.
  3. Select a remote device. In the lower FC Link or iSCSI Link tab, select the link whose advanced information you want to modify and click Properties.

    The Properties of Link dialog box is displayed.

    NOTE:

    You can also go to the Properties of Link dialog box by right-clicking the link and choosing Properties.

  4. Modify advanced properties of the remote link.

    1. Click Advanced.
    2. Select Set bandwidth and set advanced properties for the remote link.

      Table 3-39 describes the parameters.

      Table 3-39 Advanced properties of a remote link

      Parameter

      Description

      Value

      Bandwidth size

      Maximum data transfer rate of a link.

      [Example]

      100 Mbit/s

      Bandwidth usage (%)

      Usage of the link bandwidth.

      [Example]

      90

  5. Confirm the modification of the advanced properties of the remote link.

    1. Click OK.

      The security alert dialog box is displayed.

    2. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
    3. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    4. Click Close.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181492

Views: 48136

Downloads: 362

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next