Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Mirror Copy
This operation allows you to remove a mirror copy that is no longer necessary.
Prerequisites
- If there is only one mirror copy in the system, the mirror copy cannot be removed.
- If Running Status of a mirror copy is Synchronizing, the mirror copy cannot be removed.
Procedure
- Log in to DeviceManager.
- Choose
Data Protection >
HyperMirror.
- In the function pane on the left, select the HyperMirror from which you want to remove a mirror copy.
- Remove a mirror copy.
- In the lower function pane, select the mirror copy that you want to remove and click Remove.
The security alert dialog box is displayed.
- Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
- Click OK
The Execution Result dialog box is displayed indicating that the operation succeeded.
- Click Close.
- In the lower function pane, select the mirror copy that you want to remove and click Remove.
Data Protection > 
HyperMirror.
