Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Information About HyperMirrors
This operation allows you to view the basic information about HyperMirrors.
Prerequisites
At least one HyperMirror has been created in the system.
Procedure
- Log in to DeviceManager.
- Choose
Data Protection >
HyperMirror.
- In the left information pane, view information about HyperMirrors. Table 2-2 describes related parameters.Table 2-2 HyperMirror parameters
Parameter
Description
Value
Name
Name of a HyperMirror.
[Value]
- The name must be unique.
- The name contains letters, digits, underscores (_), periods (.), and hyphens (-).
- The name contains 1 to 31 characters.
[Example]
HyperMirror001
ID
ID of a HyperMirror.
[Example]
2
Health Status
Status of a HyperMirror. The value can be Normal, Degraded, or Faulty.
[Example]
Normal
Running Status
Working status of a HyperMirror. The value can be Normal, Initializing, Queuing, Synchronizing, Split, Interrupted, or Invalid.
[Example]
Normal
Storage Pool Name
Name of the storage pool to which the HyperMirror belongs.
[Example]
storagepool001
Storage Pool ID
ID of the storage pool to which the HyperMirror belongs.
[Example]
2
Capacity
Capacity of a HyperMirror.
[Example]
1.000 GB
Data Protection > 
HyperMirror.
