No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HyperClone Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the implementation principles and application scenarios of the clone feature. Also, it explains how to configure and manage clones.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing LUN Clone Information

Viewing LUN Clone Information

This operation enables you to view information about LUN clone.


  1. Log in to DeviceManager.
  2. Click vStore, select the desired vStore, and click Details to go to the vStore view. Choose Data Protection > Clone > LUN.

    The page for operating clone LUNs in the vStore is displayed.

  3. View basic information about an existing clone. Table 3-4 describes related parameters.

    Table 3-4 Clone parameters





    Name of a clone.

    Name a clone in accordance with the associated value range so that the LUN is available to host applications.

    [Value range]

    • The name must be unique.
    • The name can contain only letters, digits, periods (.), underscores (_), and hyphens (-).
    • The name contains 1 to 31 characters.




    ID of the clone.



    Primary LUN Name

    Name of the primary LUN.



    Primary LUN ID

    ID of the primary LUN.



    Health Status

    Health status of the clone, indicating whether it is healthy. Possible values are Normal and Fault.



    Running Status

    Running status of the clone, indicating whether it is running properly. Possible values are Normal, Synchronizing, Split, To be recovered, Interrupted, Queuing, Reversely synchronizing and Unknown.



    Primary LUN Capacity

    Capacity of the primary LUN.


    5.000 GB

Updated: 2019-07-11

Document ID: EDOC1000181501

Views: 21114

Downloads: 216

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next