No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperClone Feature Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. This document describes the implementation principles and application scenarios of the clone feature. Also, it explains how to configure and manage clones.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping a LUN Clone Pair

Stopping a LUN Clone Pair

This operation enables you to suspend the synchronization after it starts.

Precautions

For non-immediately available clone, you are not allowed to stop synchronization of clone pairs.

Procedure

  1. Log in to DeviceManager.
  2. Go to the clone page in the vStore view.

    The operation path varies with user types:

    • System user: Click vStore, select the desired vStore, and click Details to go to the vStore view. Choose Data Protection > Clone > LUN.
    • vStore user: In the vStore view, choose Data Protection > Clone > LUN.

  3. Select the desired clone and choose More > Stop on the menu bar.

    The Stop xxx dialog box is displayed. (xxx indicates the name of the selected clone.)

    You can also right-click the desired clone, and choose Stop.

  4. Select the desired secondary LUN and click OK.

    The security alert dialog box is displayed.

  5. Confirm the operation of stopping the secondary LUN.

    1. Read the contents of the security alert dialog box carefully. Then click the check box next to the statement I have read and understand the consequences associated with performing this operation to confirm the information.
    2. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    3. Click Close.

      The clone management page is displayed.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181501

Views: 24938

Downloads: 251

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next