No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Disk Encryption User Guide

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, 6800F V5, 18500 V5, 18500F V5, 18800 V5, and 18800F V5. It introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Key Management Server's Management Interface

Logging In to the Key Management Server's Management Interface

This section describes how to log in to the key management server through the serial port or management port.

Logging In to the Key Management Server's Management Interface Through the Serial Port

This section describes how to log in to the key management server through the serial port.

Prerequisites
  • The maintenance terminal has been connected to the key management server through the serial port.
  • The serial port supports logins only from administrators and security officers.
  • Management software that supports SSH has been installed on the maintenance terminal.
Context

The following procedure uses PuTTY as an example. You can download PuTTY from the chiark website.

Procedure
  1. Run PuTTY.
  2. Go to the command-line interface (CLI).

    1. Choose Connection > Serial.
      Figure 3-75 Serial port setting

    2. Set Serial line to connect to to the maintenance terminal's serial port connected to the key management server, and set Speed (baud) to 38400.
    3. Click Open. The CLI window is displayed asking you to log in.
      thales170 login:

  3. Type the user name and password and press Enter.

    NOTE:
    • For administrators, the default user name and password are admin and password123 respectively.
    • For security officers, the default user name and password are officer and password123 respectively.

  4. Confirm the login.

    • For the first login, perform the following steps:
      1. In the License agreement dialog box that is displayed, press Ctrl+X.

        The Confirm dialog box is displayed.

      2. Select Yes and press Enter.

        The Warning Notice dialog box is displayed.

      3. Press Enter.

        The Change Password dialog box is displayed.

      4. Enter Old Password and New Password, and confirm the new password. Choose OK and press Enter.

        The main page of the key management server's management interface is displayed.

    • If it is not your first login, choose OK on the displayed page and press Enter.

      The main page of the key management server's management interface is displayed.

Logging In to the Key Management Server Through the Management Port

This section describes how to log in to the key management server through the management port.

Prerequisites
  • Network configuration of the key management server has been completed using the serial port.
  • The maintenance terminal is communicating properly with the key management server.
Context

The following procedure uses Google Chrome as an example.

Procedure
  1. Open Google Chrome.
  2. Input https://XXX.XXX.XXX.XXX in the address box and press Enter. XXX.XXX.XXX.XXX indicates the management port IP address of the key management server.

    The keyAuthority Login page is displayed, as shown in Figure 3-76.

    Figure 3-76 Web login page

  3. Enter the user name and password and click Login.

    The Warning Notice page is displayed, as shown in Figure 3-77.

    Figure 3-77 Web login page

  4. Click Proceed.

    The web management interface is displayed.

    NOTE:

    Different user roles may see different information on the web management interface.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181504

Views: 23033

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next