No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Basic Storage Service Configuration Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, 6800F V5, 18500 V5, 18800 V5, 18500F V5, and 18800F V5. It describes the basic storage services and explains how to configure and manage them.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Ethernet Port Information

Viewing Ethernet Port Information

The following procedure guides you through how to view the information about an Ethernet port on a storage system.


An Ethernet interface module has been properly installed on a controller.


  1. Log in to DeviceManager.
  2. Choose System.
  3. Click the controller enclosure where the Ethernet port resides.
  4. Click to switch to the rear view.
  5. Click the Ethernet port whose information you want to view.

    The Ethernet Port dialog box is displayed.

  6. View the Ethernet port information.

    Table 6-2 describes Ethernet port parameters.


    GUIs may vary with product versions and models. The actual GUIs prevail.

    Table 6-2 Ethernet port parameters





    Location of the Ethernet port.


    XXX0.A1.P0 or XXX0.A.IOM0.P1


    The displayed information is consistent with actual product specifications.

    Health Status

    Health status of the Ethernet port.



    Running Status

    Running status of the Ethernet port.


    Link Up

    Working Rate (Gbit/s)

    Data transfer rate of the Ethernet port.



    Max. Working Rate (Gbit/s)

    Maximum data transfer rate of the Ethernet port.



    IPv4 Address

    IPv4 address of the Ethernet port.


    Subnet Mask

    Subnet mask of the Ethernet port's IPv4 address.


    IPv6 Address

    IPv6 address of the Ethernet port.




    Prefix length of the Ethernet port's IPv6 address



    MAC Address

    MAC address of the Ethernet port.



    Port Switch

    Switch of the Ethernet port. A port will be disconnected if the port switch is set to Disable.



    MTU (Byte)

    Maximum size of a data packet that can be transferred between the Ethernet port and the application server.



    Bond Name

    Name of the bonded Ethernet port.



    iSCSI Target Name

    Target name of the network where the Ethernet port resides.



    Number of initiators to connected to the port.



Updated: 2019-08-30

Document ID: EDOC1000181506

Views: 74739

Downloads: 562

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next