Procedure

1. Log in to DeviceManager.
2. Choose Provisioning > Host.
3. View the information about the hosts in the list.
   Table 6-15 describes related parameters.

   Table 6-15 Host parameters

   Parameter	Description	Setting
   Name	Name of a host.	[Example] host1
   ID	ID of a host.	[Example] 1
   Status	Status of a host.	[Example] Normal
   OS	Operating system used by a host.	[Example] Windows
   IP Address	IP address of a host.	[Example] 192.168.1.100
   Added to Host Group	Whether a host is added to a host group.	[Example] Yes
   Number of Initiators	Number of initiators that a host has.	[Example] 1
   vStore Name	Name of the vStore in which a host resides.	[Example] --
   vStore ID	ID of the vStore in which a host resides.	[Example] --

   NOTE:

   GUIs may vary with product versions and models. The actual GUIs prevail.

4. Select a host and view the information of initiators, mapped LUNs, mapped snapshots, or paths in the lower part.
   NOTE:

   Host LUN ID indicates the identity mapped from the host system to its LUN or snapshot.