No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Configuration Guide for Block

OceanStor V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, 6800F V5, 18500 V5, 18800 V5, 18500F V5, and 18800F V5. It describes the basic storage services and explains how to configure and manage them.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Before You Start

Before You Start

Before using this document, read this chapter carefully to ensure that the document is applicable to your storage device. This document applies to V500R007, not V500R007 Kunpeng. You can check whether the storage device version is V500R007 by observing the rear view of a controller enclosure or querying the version on DeviceManager or the CLI.

  • Yes, use this document.
  • No: use the OceanStor V5 Series V500R007 Kunpeng Basic Storage Service Configuration Guide for Block.

For details about how to check the device version, see Checking the Device Version from the Rear View of a Controller Enclosure, Checking the Device Version on DeviceManager, and Checking the Device Version on the CLI.

Checking the Device Version from the Rear View of a Controller Enclosure

If the slot layout in the rear view of a controller enclosure is shown as Figure 1-1, Figure 1-2, or Figure 1-3, the device version is V500R007.

Figure 1-1 Rear view of a controller enclosure

Figure 1-2 Rear view of a controller enclosure

Figure 1-3 Rear view of a controller enclosure

Checking the Device Version on DeviceManager

Log in to DeviceManager. In the navigation tree of DeviceManager, click Home. In the Basic Information area of the function pane, check whether Version is V500R007CXX, as shown in Figure 1-4.
  • If Version is V500R007CXX, the device version is V500R007.
  • If Version is V500R007CXX Kunpeng, the device version is V500R007 Kunpeng.
Figure 1-4 Basic information about the storage device

For details about how to log in to DeviceManager, see section "Logging In to DeviceManager" in the installation guide of the corresponding product model.

Checking the Device Version on the CLI

Log in to the command-line interface (CLI) of a storage device and check Product Version.

  • If Version is V500R007CXX, the device version is V500R007.
  • If Version is V500R007CXX Kunpeng, the device version is V500R007 Kunpeng.
System Name     : Huawei.Storage 
Health Status   : Normal 
Running Status  : Normal 
Total Capacity  : XXXXX 
SN              : XXXXXXXXXXXXXXXXXXXXXXXXX 
Location        : 
Product Model   : XXXXX 
Product Version : V500R007CXX
Time            : XXXX-XX-XX/XX:XX:XX UTC+XX:XX 
Patch Version   : XXXXX

For details about how to log in to the CLI, see section "Logging In to the CLI" in the installation guide of the corresponding product model.

Download
Updated: 2020-01-17

Document ID: EDOC1000181506

Views: 86842

Downloads: 633

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next