No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Installation Guide

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, and 6800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing Windows AD Domain Configuration Data

Preparing Windows AD Domain Configuration Data

Collect configuration data of a Windows AD domain server in advance to add storage systems to the AD domain. The section uses Windows Server 2008 R2 as an example to explain how to prepare Windows AD domain configuration data.

  1. Log in to the Windows AD domain server. Choose Start > Administrative Tools > Active Directory Users and Computers. The Active Directory Users and Computers software is displayed. View and record related parameters on the software page.
  2. Obtain the Base DN information. As shown in the figure, icp.com corresponds to Base DN on the configuration page of the storage system, that is, dc=icp,dc=com.

  3. Obtain the Bind DN information.
    1. Set the advanced features of the AD domain server to be visible. On the menu bar of the Active Directory Users and Computers software, click View, and select Advanced Features.

    2. Select the Users folder under icp.com.

    3. The Administrator is used as an example. Right-click Users, and select Properties.

    4. In the displayed properties box, click Attribute Editor, select the distinguishedName property, and click View to obtain the Bind DN information. The queried Bind DN record is cn=Administrator,cn=Users,dc=icp,dc=com.

      NOTE:

      The Attribute Editor option is available only after you select the Advanced Features when (Step 3.a) setting the advanced features of the AD domain server to be visible.

  4. Obtain the User Directory information. (This information is required when an LDAP user is created.)
    1. The Administrator under Users is used as an example. Select the Users folder under icp.com, and right-click Properties.

    2. In the displayed properties box, click Attribute Editor, select the distinguishedName property, and click View to obtain the User Directory information. The queried User Directory record is cn=Users,dc=icp,dc=com.

  5. Obtain the Group Directory information. (This information is required when an LDAP user group is created.)
    1. The Domain Admins user group under Users is used as an example. Select the Domain Admins user group, and right-click Properties.

    2. In the displayed properties box, click Attribute Editor, select the distinguishedName property, and click View to obtain the Group Directory information. The queried Group Directory record is cn=Domain Admins,cn=Users,dc=icp,dc=com.

  6. For the IP Address and Bind Password of the AD domain server, contact the Windows AD domain server administrator.
NOTE:

For details about how to create AD domain users and groups on the AD domain controller, see How Can I Create AD Domain Users and Groups on the AD Domain Controller?.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181531

Views: 93060

Downloads: 868

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next