No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Installation Guide

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, and 6800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparations

Preparations

Before applying for a license, make preparations to facilitate the license application.

Table 10-3 describes the preparations for license application.

Table 10-3 Preparations for license application

Item

Description

GTS permission for the ESDP (applicable to Huawei service engineers)

Users who have the GTS permission can apply for licenses in Applying for a License in Entitlement Activation Mode. If you do not have the GTS permission, click Permission Application in the left navigation tree of the ESDP home page and complete the permission application.

ASP or Guest permission for the ESDP (applicable to Huawei partners or customers)

Users who have the ASP or Guest permission can apply for licenses in Applying for a License in Password Activation Mode. Click Register Now on the ESDP home page and fill in related registration information. Then you are granted the ASP or Guest permission.

Equipment Serial Number (ESN)

An ESN is a unique character string that identifies a device. It ensures that software is licensed to the specified device. You can obtain an ESN in the following ways:

  • View the ESN on the information plate.
  • On the navigation bar of the DeviceManager, click Home. In the function pane, view SN in the Basic Information area.
  • Log in to the command-line interface (CLI). Then, run the show system general command and view SN.

For details, see Querying the ESN on the Information Plate, Querying the ESN on DeviceManager, and Querying the ESN on the CLI.

NOTE:

For a multi-controller storage system that contains two or more controller enclosures, the ESN of controller enclosure 0 is used as the ESN of the storage system. The ESN of the multi-controller storage system queried on DeviceManager or CLI through the management network port of any controller enclosure is always the ESN of controller enclosure 0. You are advised to use DeviceManager or CLI to query the ESN. If you want to query the ESN on the information plate, obtain the position of controller enclosure 0 on the system networking diagram used for controller expansion and then check the ESN on the information plate of controller enclosure 0.

NOTE:

The license file covers all features purchased by the customer.

Querying the ESN on the Information Plate

The information plate is located on the right side of the front panel of a controller enclosure, as shown in Figure 10-10, Figure 10-11, and Figure 10-12. Pull out the information plate from the controller enclosure to query the device information.

Figure 10-10 Information plate position of a 2 U controller enclosure

Figure 10-11 Information plate position of a 3 U controller enclosure

Figure 10-12 Information plate position of a 6 U controller enclosure

Querying the ESN on DeviceManager

  1. Log in to DeviceManager.
  2. In the navigation tree on the right, click Home.
  3. In Basic Information, view SN.

Querying the ESN on the CLI

  1. Log in to the CLI.
  2. Run the show system general command to view the ESN, namely the SN field in the command output.

    admin:/>showsystemgeneral 
      System Name         : XXX.Storage  
      Health Status       : Normal  
      Running Status      : Normal  
      Total Capacity      : 3.186TB  
      SN                  : 2102XXXXXXXXXXXXXXXX  
      Location            :  
      Product Model       : XXXX  
      Product Version     : VX00R00XCXX  
      High Water Level(%) : 80  
      Low Water Level(%)  : 30  
      WWN                 : XXXX  
      Time                : 2018-07-07/15:34:05 UTC+08:00 
      Patch Version       : SPCXXX SPHXXX 
      Description         :

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181531

Views: 93886

Downloads: 871

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next