No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Installation Guide

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, and 6800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Safety Precautions for ESD Protection

Safety Precautions for ESD Protection

When installing or maintaining the equipment, follow the ESD safety precautions to prevent personal injury and equipment damage.

indicates an electrostatic sensitive area. To prevent personal injury and equipment damage when operating equipment in this area, wear an ESD wrist strap, ESD clothing, or ESD gloves. Note the following:

  • Do not wear an ESD wrist strap when powering on the equipment to prevent an electric shock.
  • Do not touch devices with bare hands to prevent damage to the electrostatic sensitive devices (ESSDs) on the circuit boards.
  • The electronic line is prone to electrostatic damage. Wear an ESD wrist strap, ESD gloves, and ESD clothing when handling disks, especially bare disks. Hold a disk by its edge.
  • Since an ESD wrist strap only prevents static electricity from the body, the ESD clothing is required to prevent static electricity from clothes.
  • Before installing or replacing devices, wear an ESD wrist strap, ESD gloves, and ESD clothing to protect you and the equipment from static electricity.
  • Use special ESD bags to carry or transport device components.
Updated: 2019-07-11

Document ID: EDOC1000181531

Views: 93079

Downloads: 868

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next