No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Installation Guide

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5300F V5, 5500 V5, 5500F V5, 5600 V5, 5600F V5, 5800 V5, 5800F V5, 6800 V5, and 6800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a PDU

Installing a PDU

Vertically install PDUs on the PDU installation plates on both sides at the back of a cabinet to provide power for the components in the FR42612L cabinet.

For the N610E cabinet, a PDB has already been installed in the cabinet and does not need to be installed again.

Prerequisites

  • The cabinet has been installed.
  • All required tools have been prepared, including Phillips screwdrivers, M6 screws, ladders, and protective gloves.

Procedure

  1. Wear protective gloves.
  2. Fit the upper and lower round tabs on the PDU rear panel into pear-shaped holes on the PDU installation plate and push them downwards to lock the PDU.

    Figure 5-35 Installing a PDU

    NOTE:

    It is recommended that two persons collaborate to install the PDU so that PDU tabs can be easily oriented to the installation holes.

  3. Use the Phillips screwdriver and M6 screws to secure the PDU to the cabinet.
  4. Repeat Step 2 and Step 3 to install another PDU on the other side of the cabinet.
Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181531

Views: 92999

Downloads: 859

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next