About This Document
Purpose
This document describes how to replace parts of OceanStor 2800 V5 storage system and provides instructions on safety operations, preparations, and precautions.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 10 (2019-08-20)
This is the tenth release.
Added supported quorum server models.
Updated CRUs and FRUs.
Issue 09 (2019-06-30)
This issue is the ninth official release.
Added the section "How to Access Parts Replacement Multimedia."
Optimized some descriptions.
Issue 08 (2019-05-15)
This issue is the eighth official release.
Optimized some descriptions.
Issue 07 (2019-03-30)
This issue is the seventh official release.
Optimized some descriptions.
Issue 06 (2019-01-25)
This issue is the sixth official release.
Optimized some descriptions.
Issue 05 (2018-12-06)
This issue is the fifth official release.
Optimized the document structure based on the replacement methods of CRUs and FRUs.
Updated operations related to SmartKit.
Issue 04 (2018-07-30)
This issue is the fourth official release.
Optimized some descriptions.
Issue 03 (2018-05-09)
This issue is the third official release.
Updated SmartKit operations in section "Replacing an FRU."
Issue 02 (2018-01-30)
This issue is the second official release.
Rectified some descriptions of replacing a controller.
Issue 01 (2017-11-30)
This issue is the first official release.
Previous
