adm show array
Example
To show the information about all disk arrays, run the following command.
admin:/diagnose>adm show array arrayid(512) status(Running) fclinknum(1) iscsilinknum(0) lunnum(0) onlineflag(0) ctrloutflg(0) sn(--) wwn(--) alias(Default) vendor(--) product(--) reversion(--) event(0) reporttime(0) arrayid(513) status(Offline) fclinknum(0) iscsilinknum(0) lunnum(0) onlineflag(0) ctrloutflg(0) sn(210235G7K410D9000005) wwn(--) alias(HUAWEI_S3900-M300_513) vendor(HUAWEI ) product(S3900-M300 ) reversion(2105) event(0) reporttime(0) arrayid(514) status(Running) fclinknum(1) iscsilinknum(0) lunnum(0) onlineflag(1) ctrloutflg(0) sn(210235G6TFZ0CC000039) wwn(--) alias(HUAWEI_S2900_514) vendor(HUAWEI ) product(S2900 ) reversion(2105) event(0) reporttime(0)
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
---|---|
arrayid | ID of the heterogeneous disk array. |
status | Status of the heterogeneous disk array. |
fclinknum | Number of Fibre Channel links. |
iscsilinknum | Number of iSCSI links. |
lunnum | Number of external LUNs. |
onlineflag | Online bitmap. |
ctrloutflg | Offline bitmap. |
sn | SN of the heterogeneous disk array. |
wwn | WWN of the heterogeneous disk array. |
alias | Alias of the heterogeneous disk array. |
vendor | Vendor of the heterogeneous disk array. |
product | Product model of the heterogeneous disk array. |
reversion | Version of the heterogeneous disk array. |
event | Event type. |
reporttime | Event report time. |