pmgr showpool
Parameters
Parameter |
Description |
Value |
---|---|---|
poolid | ID of the disk domain. | To obtain the value, run the "show disk_domain general" command in super administrator mode. |
Example
View information about a disk domain.
admin:/diagnose>pmgr showpool poolid | Isworknode | diskNum | backGround |service | IsOnLine | IsHang | Runningstatus | Healthstatus | IsMetaRepair 0 YES 10 ON ON YES NO ONLINE NORMAL OFF
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
---|---|
poolid | Disk domain ID. |
Isworknode | Whether the local controller is the working controller. |
diskNum | Number of disks in the disk domain. |
backGround | Whether the background task is started in the disk domain. |
service | Whether the background service is started in the disk domain. |
IsOnLine | Whether the disk domain is online. |
IsHang | Whether the disk domain is suspended. |
Runningstatus | Operating status of the disk domain. |
Healthstatus | Health status of the disk domain. |
IsMetaRepair | Whether metadata recovery is being implemented for the disk domain. |