Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mtest
Function
The mtest command is used to conduct read and write tests on the RAM.
Format
mtest [start [end ]]
Parameters
Parameter |
Description |
Value |
|---|---|---|
start |
Start address. |
Enter the value as required. |
end |
End address. |
Enter the value as required. |
Modes
serial port mode
Usage Guidelines
None
Example
Conduct read and write tests on the RAM.
Hi1710_UBOOT> mtest 0x82000000 0x82000010
Pattern 00001E20 Writing... Reading...
System Response
None
Previous
