No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vm_service general

change vm_service general


The change vm_service general command is used to modify the service status of a virtual machine.


change vm_service general status=?





status=? Whether to enable service of a virtual machine.

Possible values are "Running" or "Stopped", where:

  • "Running": indicates that service of a virtual machine is enabled.
  • "Stopped": indicates that service of a virtual machine is disabled.
The default value of 2800 V3 is "Running", and that of other products is "Stopped".


Developer view

Usage Guidelines

OceanStor 2800 V5 (32 GB), 5600 V5 (128 GB), and 5800 V5 (256 GB) do not support this command.


Enable service of a virtual machine.

developer:/>change vm_service general status=Running
WARNING: You are about to start the VM service.This operation restarts the system. After the restart, system performance deteriorates because some memory and CPU resources are reserved for VMs.
1. Stop all host services before starting the VM service.
2. Ensure that no cache partitions are created in the system. Otherwise, the VM service cannot be started.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 729499

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next