No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show statistics ftp_connection

show statistics ftp_connection


The show statistics ftp_connection command is used to query the FTP connection information.


show statistics ftp_connection [ controller=? ]





controller=? Indicates the controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C".


Developer view

Usage Guidelines

If this command is executed without parameters, this command is executed on the primary node.


Query the FTP connection information.

developer:/>show statistics ftp_connection controller=0A
Client Ip     User Name    Port  Connect Time(Sec) 
-----------   ---------    ----  ------------    ftp-user1    8932   3    ftp-user2    8765   10    ftp-user3    8623   15

System Response

The following table describes the parameter meanings.



Client Ip

Indicates the IP address used by the client to access the FTP.

User Name

Indicates the user name used by the client to access the FTP.


Indicates the port used by the client to access the FTP.

Connect Time(Sec)

Indicates the time duration when the client is connected.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 729364

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next