Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ftds delay_statistics_switch
Function
The show ftds delay_statistics_switch command is used to show configuration information about the specified LUN or file system whose latency statistics are collected on a specified controller.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| controller | ID of a controller. | To obtain the value, run "show controller general". |
Example
-
When the latency statistics function is enabled for the LUN or file system on controller 0A, show configuration information about the LUN or file system whose latency statistics are collected on controller 0A.
developer:/>show ftds delay_statistics_switch controller=0A Type : lun ID : 0
-
When the latency statistics function is disabled for the LUN or file system on controller 0A, show configuration information about the LUN or file system whose latency statistics are collected on controller 0A.
developer:/>show ftds delay_statistics_switch controller=0A Command executed successfully. No matching records.
Previous
