Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showclm
Function
The sys showclm command is used to view cluster locks.
Format
sys showclm
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
View cluster clocks.
admin:/diagnose>sys showclm
clm status : master is normal, proxy is normal
active nodes : 0xf(bit is set for active)
master node : 0
local info : node(0), version(1), status(0)
master record : proxy id lock version
-------- ------------
node 0 1
node 1 1
node 2 1
node 3 1
node 4 -1
node 5 -1
node 6 -1
node 7 -1
node 8 -1
node 9 -1
node 10 -1
node 11 -1
node 12 -1
node 13 -1
node 14 -1
node 15 -1
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
lock version |
Lock version. 1 indicates that the lock is powered on once. The initialization value is -1. |
Previous
