Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lm showhealstate
Function
The lm showhealstate command is used to check the self-healing state of a LUN migration.
Format
lm showhealstate
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
To check the self-healing state of a LUN migration, run the following command.
admin:/diagnose>lm showhealstate
The LUN Migration heal module is enable.
System Response
None
Previous
