Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lm showlunservice
Function
The lm showlunservice command is used to check the detail information about a LUN migration pair service.
Parameters
Parameter |
Description |
Value |
---|---|---|
Pair ID | LUN migration ID. | To obtain the value, run the "lm getpairid" command on the work controller of the source LUN in diagnose mode. |