No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
restore cluster factory_mode

restore cluster factory_mode


The restore cluster factory_mode command is used to clear the cluster configuration data and restore the cluster to the default settings.


restore cluster factory_mode




Developer view

Usage Guidelines

The cluster restores to the default settings after you run this command.


To restore the cluster to default settings, run the following command.

developer:/>restore cluster factory_mode
DANGER: You are going to clear the cluster configuration data and restore the cluster to factory settings. This operation interrupts all running services on the storage system. After restart, the original configurations and logs are cleared, and the system is restored to default settings. All data becomes invalid. Read and write operations are unavailable until the system is reconfigured. 
Suggestion: Before performing this operation, implement the following steps:
1. Determine whether to clear all configurations.
2. Back up the existing configuration data.
3. Stop all running services on the storage system.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 729432

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next