No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
metadata showbitmap

metadata showbitmap


The metadata showbitmap command is used to view the mapping between file system ID/vStore ID and the key in the configuration synchronization module.


metadata showbitmap




Diagnostic view

Usage Guidelines

For file systems, run this command on the file system working controller. For vStores, run this command on the cluster master node.


View the mapping between file system ID/vStore ID and the key in the configuration synchronization module.

admin:/diagnose>metadata showbitmap
tntid(1) key1(33554432) key2(4294967295) key3(4294967295)
show metadata bitmap exec successful.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 726666

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next