No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change verify_stripe config

change verify_stripe config


The change verify_stripe config command is used to set the maximum number of I/O concurences of LUN stripe verification.


change verify_stripe config thick_io_num=? thin_io_num=?





thick_io_num=? Indicates the maximum number of I/O concurrences in thick LUN stripe verification.

The value ranges from 1 to 32.

thin_io_num=? Indicates the maximum number of I/O conncurrences in thin LUN stripe verification. If the number of front-end concurrences execceds 2048, the value is 128, otherwise, it is 64.

The value ranges from 1 to 128.


Developer view

Usage Guidelines

This command is applicable only to the local controller.


To set the maximum number of I/O concurreces of the thick LUN and thin LUN stripe verification on the controller to 16, run the following command:

developer:/>change verify_stripe config thick_io_num=16 thin_io_num=16
Command executed successfully.

System Response


Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 782592

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next