Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hdm show logpage
Function
The hdm show logpage command is used to view a specific log page of a disk.
Format
hdm show logpage sdid=? pagecode=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
sdid=? |
Physical ID of the disk. |
To obtain the value, run "sddebug show disk" without parameter. |
pagecode=? |
ID of a log page. |
The value is an integer, reference the SCSI protocol. |
Views
Diagnostic view
Usage Guidelines
None
Example
View a specific log page of a disk.
admin:/diagnose>hdm show logpage sdid=68 pagecode=0x2f
LogPage info
------------------------
2F 00 00 06 00 00 00 02
00
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
LogPage info |
Information on the log page, expressed in binary numbers. |
Previous
