No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_vstore_pair cfg_switch

show hyper_metro_vstore_pair cfg_switch


The show hyper_metro_vstore_pair cfg_switch command is used to query the switch status of configuring synchronization for vStore pairs.


show hyper_metro_vstore_pair cfg_switch pair_id=? partition_type=? option_type=?





pair_id HyperMetro vStore pair ID.

To obtain the value, run the "show hyper_metro_vstore_pair general" command.

partition_type Type of a configuration synchronization partition.
  • "resource": resource partition.
  • "nfs_v3": NFSv3 lock partition.
  • "global": global partition.
  • "domain": domain control partition.
option_type Option type ID.
  • For a resource partition, the value is "0".
  • For an NFSv3 lock partition, the value is "0".
  • For a global partition, the value is "0".
  • For a domain control partition, the value is "0", "1", or "2".


Developer view

Usage Guidelines



Query the switch status of configuring a synchronization partition for a specified HyperMetro vStore pair. The pair ID is "200bc79b99520000", partition_type is "NFS_V3", and option_type is "0".

developer:/>show hyper_metro_vstore_pair cfg_switch pair_id=200bc79b99520000 partition_type=nfs_v3 option_type=0
  Switch Status : On

System Response

The following table describes the parameter meanings.



Switch Status

Switch Status: open, close.

Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 787138

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next