Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset disk_bom whitelist
Function
The reset disk_bom whitelist command is used to restore the initial configuration of a BOM whitelist.
Usage Guidelines
- In the disk access process, do not run the command.
- After this operation, all disk items added to the BOM whitelist will be cleared.
Example
Restore the initial configuration of a BOM whitelist.
developer:/>reset disk_bom whitelist WARNING: You are about to initialize the BOM whitelist configuration. This operation will clear all added and deleted items, and change whether disks on the storage array can access the system. Suggestion: Before performing the operation, run the "show disk_bom whitelist detail=yes" commands to obtain the configured item and perform backup. Have you read warning message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.
